There is no other monster truck like E-Revo. It embodies the highest level of creativity in design and engineering that unleashed a stunning array of new technology, new innovation, and unheard of speed that reset every benchmark for racing monster truck performance. Now there is a new generation of E-Revo. This new E-Revo retains all the benefits of its original ground-breaking, award-winning design, but fortifies them with brute strength and an intense, take-no-prisoners attitude to deliver what is simply the ultimate 6s monster. Get ready for a whole new level of power, strength, and speed.
Maxx-Spec™ Driveline
Taking inspiration from its big brother X-Maxx, E-Revo’s drive system has evolved to meet today’s demands for punishing 6s performance. Jump higher. Rip harder. Release your inner beast mode. E-Revo comes out of the box ready to attack, ready for wherever your imagination takes you.
Self-Righting
E-Revo’s over-the-top power can sometimes land you upside down. Traxxas’ exclusive Self-Righting system keeps the fun going with minimal interruption. Simply press a button on the transmitter and, in most circ*mstances, E-Revo will be back on its wheels in just seconds.
Brutal 6s Power
Armed with a fortified drivetrain, E-Revo’s VXL-6s power system now pounds out more tire-scorching motivation than ever before, all the way to 70+ mph. Advanced design and sophisticated microprocessor control make this the most punchy and reliable high-voltage VXL power system ever. Traxxas Extreme Power is the new normal and E-Revo comes ready for any challenge.
Model 86086-4 $549.95
Buy Now
Video
Innovation
E-Revo breaks new ground with its stronger low-CG chassis, Maxx-Spec™ driveline upgrades, and improved driving dynamics.
Advanced In-Board Suspension
The rocker-actuated suspension drastically multiplies the suspension travel for huge articulation and what feels like a bottomless well of plush damping. Additional benefits include built-in progressive spring rate courtesy of the rocker geometry and the ability to independently change adjustments such as ride height without affecting the damping and spring rate. The inboard shocks are mounted horizontally to lower the CG and are naturally protected from impacts and debris. The innovative E-Revo suspension design is unmatched for travel and performance for all types of driving and terrain.
Innovative Low-CG Chassis
The Revo chassis is a highly engineered approach that allows incredible strength and lightweight performance not possible with traditional designs. The chassis absorbs and dissipates huge impacts without bending. Major components such as the batteries are placed as low and close to the centerline as possible to lower the center of gravity (CG) for superior, balanced handling. Key areas were targeted for added strength and rigidity such as the battery compartments and the bulkhead mounts. New front and rear top braces resist flex and further protect the inboard shocks.
New Differentials
The new E-Revo 4-gear differentials feature massively larger ring and pinion gears that use over twice as much steel for extreme durability. The differentials are sealed and filled with heavyweight oil, giving them the performance feel of limited-slip differentials. Steel drive cups fit over huge 8mm hardened steel output shafts which ride on oversized sealed bearings.
Maxx-Spec™ Driveline
A Cush Drive is integrated into the spur gear to help protect against driveline impacts while delivering maximum power transfer and response. The cast alloy Torque-Biasing Center Drive also improves driveline durability and controls front-to-rear power distribution for absolutely mind-bending four-wheel drive acceleration. It’s precision-tuned to allow instant wheels-up punch off the line and seamless, virtually invisible operation at speed.
VXL-6s Power System
The new VXL-6s speed control is an all-new Traxxas design that incorporates advanced microprocessor control with sophisticated software for smooth responsive performance and a rich feature set. The VXL-6s delivers real-time telemetry to the Traxxas Link app with the optional TQi Wireless Module (part #6511, sold separately). The massive 2200kV brushless motor lays down the torque and horsepower for blistering acceleration and screaming 70+ mph top speed.
Large Aggressive Stance
E-Revo’s wider track and longer wheelbase give it a menacing stance along with more capability. E-Revo is firmly planted for vastly improved stability everywhere, whether off-road, in the corners, or at top speed.
Clipless Body Mounting
New, rugged, clipless body latching system was used for secure mounting and easy one-handed removal. The latching system incorporates an internal body cage that greatly strengthens the body for long life. This strong and innovative body and cage system was proven on X-Maxx and is ready to take on E-Revo’s brutal power and speed.
Traxxas Self-Righting
E-Revo naturally encourages high speed and high-flying stunts, but sometimes the landings leave you rubber side up. Pioneered on the X-Maxx, exclusive Traxxas Self-Righting powers the E-Revo back onto its wheels with just the press of a button. In most situations, the fun does not have to stop just to rescue an upside-down truck.
New ProGraphix Bodies
The E-Revo’s iconic shape has been updated with subtle enhancements. An internal frame stiffens the body while external reinforcements on the top provide extra protection where it is needed most during rollovers. Two new color choices provide a fresh look to match E-Revo’s tough new attitude.
TQi Radio System
The fully featured Traxxas TQi 2.4GHz radio system delivers superior speed, precision, and control. It is Traxxas Link enabled so you can add a module (part #6511, sold separately) and connect wirelessly to the Traxxas Link app using your smart phone. The Traxxas Link app allows you to adjust your settings and view real-time telemetry. Learn More
Traxxas Stability Management
Traxxas Stability Management (TSM) works behind the scenes to help harness E-Revo’s brutal power for maximum acceleration and ultra-precise control. Adjust the amount of assistance from off to 100% right from your transmitter. Learn More
Waterproof From the Start
Water? Mud? Snow? Bring it on! Traxxas was first to offer patented innovative waterproofing solutions to extend your fun into environments that were previously off limits to radio controlled trucks.
Details
With just a handful of parts carrying over from the previous generation, the next generation E-Revo packs dozens of upgrades to make it the ultimate go-to vehicle for insane stunts and backyard bashing.
New Wheels and Tires
New larger, meatier, all-terrain Talon™ EXT tires provide superior off-road traction and performance. The aggressive tread pattern features a tougher rubber compound and thicker sidewalls to better handle punishing 6s wheel speeds. New 6-spoke black wheels are engineered for maximum strength along with a rugged, menacing stance.
New Suspension Arms
The E-Revo’s double wishbone design maintains proper suspension geometry throughout the entire range of travel. These high-tech suspension arms were originally developed with finite element analysis to find smarter ways to resist breakage. Today they are even beefier with more material in almost every dimension and tougher new composites that further resist impact damage, even in cold weather.
Heavy-Duty Suspension Links
The suspension utilizes thicker 5mm steel links with larger rod ends and more thread engagement to make this the toughest E-Revo suspension ever.
Functional Rear Wing
Another hallmark of the E-Revo, the functional rear wing position is optimized to reduce drag while still providing valuable downforce for stability. A rigid cross-braced support allows multiple wing adjustments and provides ample support in case of rollovers. The wing also makes a great wheelie stop when exerting full 6s power!
Quick Release Battery Doors
The innovative chassis design incorporates protected battery enclosures into the sides of the chassis for an ultra-clean look. Quick release battery doors mount directly to the chassis, so there are no clips or hold downs to lose. The battery compartments have been beefed up to practically eliminate flex and provide more secure battery door latching.
Adjustable Battery Compartments
Keyed, adjustable L-braces inside the battery compartments position the batteries in multiple positions from front to rear for precise weight bias tuning. A top-mounted, spring-loaded clip holds the battery packs securely at the lowest point to keep the CG as low as possible.
Battery Cooling Vents
The battery enclosures are vented with artfully designed intakes and exits to provide cooling air to the batteries.
Waterproof Receiver Box
E-Revo’s fun is not limited by mud, snow, or water. A sealed receiver box with easy access plug protects the TQi TSM receiver for all-weather adventure. Dirty truck? Just hose it off. The ESC, servos, and receiver box are fully waterproof.
5mm Motor Plate
A stronger and thicker 5mm blue-anodized aluminum motor plate uses larger hardware to keep the motor fixed in place during the hardest bashing sessions.
Low-Profile Transmission
The transmission sits low in the chassis to keep the center of gravity as low as possible. A new, more compact gearbox design is optimized for E-Revo duty. The motor is positioned as close to the centerline of the chassis as possible to neutralize the left/right chassis bias.
Dual-Servo Steering System
E-Revo delivers tight, fast steering action through its unique dual-servo system. With a total of 250 oz.-in. of tire-turning torque on hand, E-Revo steers with precise authority. An updated center bellcrank provides more steering throw for even better turning response.
GTR Shocks
Large diameter oil-filled GTR shocks attach to the progressive rocker arms for silky-smooth damping. Threaded aluminum bodies feature collars for easy spring pre-load adjustment. Silicone bladders and X-ring seals prevent leaks for long-lasting performance.
New Heavy-Duty Bulkheads
The front and rear bulkheads were completely reengineered to provide clearance for the massively larger ring and pinion gears. The new design is much more rigid, capturing the differential in an upper and lower bulkhead configuration that allows strengthened integration with the chassis and skidplates, as well as easier access for cleaning and service.
New Axle Carriers
Larger, stronger axle carriers accommodate bigger bearings and huge 8mm hardened steel stub axles. The pivot ball design allows extreme suspension movement and easy camber adjustments. The pivot-ball caps have been refined to help prevent loosening. Silicone rubber seals protect against dirt for smooth, reliable operation.
Maxx-Spec™ Driveshafts
E-Revo takes a nod from X-Maxx with its hardened steel CV driveshafts equipped with massive 8mm stub axles. The hardened steel drive cups mount to larger 8mm hardened steel differential outputs. These driveshafts were originally engineered for ultimate strength in the X-Maxx and are now right at home in E-Revo. Now you can experience all the performance and fun 6s power has to offer without holding back.
New Center Driveline
Continuing with the theme of ultimate 6s performance and fun, E-Revo’s center driveline was dramatically strengthened with larger diameter shafts in front, increased spline engagement and beefed-up yokes.
Cush Drive™
The Cush Drive absorbs drivetrain shocks with a custom-shaped elastomer damper housed between the spur gear and the drive hub. Under extreme load (such as hard, high-traction acceleration), the elastomer flexes to dissipate shock without interrupting power flow. The result is instant acceleration with no wasted power.
Torque-Biasing Center Drive
The Torque-Biasing Center Drive absorbs shocks to improve driveline durability. The Center Drive also distributes power to all four wheels for mind-bending four-wheel drive acceleration without the side effects of a typical center differential. Center differentials allow tires in the air to balloon uncontrollably, while the Torque-Biasing Center Drive allows wheelies off the line with seamless power distributed to all four wheels.
Heavy-Duty Module 1 Gears
E-Revo is equipped with Metric Mod-1 gear pitch which translates into larger, more durable gear teeth and greater power handling. E-Revo’s gears are a full 12mm wide to spread drive loads over a greater area to extend wear and increase efficiency.
New Differentials
These incredibly tough new 4-gear differentials are similar to those used in X-Maxx and feature larger 8mm output shafts, oversized bearings, and beefed-up spider gears for reliable performance, stunt after stunt.
Heavy-Duty 17mm Hex Hubs
17mm splined aluminum hex hubs provide unsurpassed torque handling. The larger 8mm stub axle utilizes a beefier 3mm pin retained by a separate set screw.
Fixed Gear Mesh
An innovative fixed gear adjustment system holds the pinion/spur gear mesh perfectly in place, even during the most extreme driving conditions.
Photo Gallery
- Action
- Details
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo In Action
E-Revo Front Three-Quarter View (Solar Flare)
E-Revo Three-Quarter View (Purple)
E-Revo Three-Quarter View (Blue)
E-Revo 3-quarter look (Orange)
E-Revo 3-quarter look from the front (Green)
E-Revo Front View (Solar Flare)
E-Revo Front View (Purple)
E-Revo Front View (Blue)
E-Revo straight-on look from the front (Orange)
E-Revo straight-on look from the front (Green)
E-Revo Side View (Solar Flare)
E-Revo Side View (Purple)
E-Revo Side View (Blue)
E-Revo side look (Orange)
E-Revo side look (Green)
E-Revo Rear Three-Quarter View (Purple)
E-Revo Rear Three-Quarter View (Blue)
E-Revo 3-quarter look from the rear (Orange)
E-Revo 3-quarter look from the rear (Green)
E-Revo look from above (Orange)
E-Revo chassis side look
E-Revo chassis look from above
E-Revo chassis 3-quarter look from the front
E-Revo clipless body latch
E-Revo's new fortified body
E-Revo's chassis skid plates
E-Revo's chassis skid plates
GTR Shocks
E-Revo's new suspension arm
E-Revo
E-Revo
E-Revo
E-Revo
E-Revo
E-Revo
E-Revo
E-Revo
E-Revo
E-Revo
E-Revo - Traxxas Self-Righting
Stay Updated
E-Revo Data
- Truck Specs
- Motor Specs
- ESC Specs
- Features List
- What’s Included
Length: | 23.05 inches (585mm) |
---|---|
Width: | 18.32 inches (465mm) |
Ground Clearance: | 2.9 inches (73mm) |
Weight: | 11.2lb (5.08kg) |
Height: | 8.7 inches (221mm) |
Wheelbase: | 14.94 inches (380mm) |
Front Shock Length: | 3.42 inches (87mm) |
Rear Shock Length: | 3.42 inches (87mm) |
Tires (pre-glued): | 6.4 x 3.5 inches (162mm x 88mm) |
Wheels: | 3.8 inches (97mm) |
Speed Control: | Velineon® VXL-6s |
Motor (electric): | 2200kV |
Transmission: | Single speed |
Gear Pitch: | 1.0 Metric pitch (Mod-1) |
Final Drive Ratio: | 20.49:1 |
Differential Type: | Sealed, 4-gear |
Center Differential Type: | Sealed, 4-gear (20M weight oil) |
Chassis Structure / Material: | Composite tub |
Brake Type: | Electronic |
Drive System: | Shaft driven 4WD |
Steering: | Bellcrank |
Radio System: | TQi™ 2-channel transmitter with 6533 TSM receiver |
Servo: | Dual 2075 |
Top Speed (optional gearing): | 70+ mph |
Skill Level: | 3 |
Battery Compartment: | 156mm x 50mm x 29mm |
Gear Pitch: | 1.0 Metric pitch (Mod-1) |
---|---|
Final Drive Ratio: | 20.49:1 |
Differential Type: | Sealed, 4-gear |
Center Differential Type: | Sealed, 4-gear (20M weight oil) |
Chassis Structure / Material: | Composite tub |
Brake Type: | Electronic |
Drive System: | Shaft driven 4WD |
Steering: | Bellcrank |
Radio System: | TQi™ 2-channel transmitter with 6533 TSM receiver |
Servo: | Dual 2075 |
Top Speed (optional gearing): | 70+ mph |
Skill Level: | 3 |
Battery Compartment: | 156mm x 50mm x 29mm |
Type: | 2200kV Sensorless brushless |
---|---|
Weight: | 14.32oz (406g) |
Length: | 2.97 inches (75.5mm) |
Diameter: | 1.65 inches (41.8mm) |
Connector Type: | Traxxas 6.5mm bullet connectors |
Input Voltage (cells): | 4s–6s LiPo (max: 25.2 volts) |
---|---|
Case Size: | 2.28” (58mm) x 2.83” (72mm) x 1.81” (46mm) |
Weight: | 7.30oz (207g) |
BEC Voltage: | 6.0 V |
BEC Current Continuous: | 10 A |
BEC Current Peak: | 20 A |
Reverse Delay: | Yes, with lockout |
Ports: | RX Input, Auxiliary Fan, Traxxas Accessory Port |
- VXL-6s™ Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link
- Machined heat sink
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Patented Traxxas High-Current Connectors
- Velineon® 2200kV Brushless Motor
- 4-pole 2200kV brushless motor
- 5mm output shaft
- Finned can for better heat dissipation
- Up to 70+ mph with Two 3s LiPo Batteries
- Traxxas Stability Management® (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi™ 2.4GHz High Output Radio System
- TQi 2-channel transmitter
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- High 13ms frame rate and near-zero latency for responsive control
- 5-channel micro receiver (#6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug
- Drivetrain
- Maxx-Spec™ steel CV driveshafts
- 8mm steel stub axles
- Heavy-duty telescoping center driveshafts
- Transmission
- Mod-1 pinion and spur gears
- Fixed gear mesh system
- Torque-Biasing Center Drive
- Cush Drive (no slipper clutch)
- 5mm aluminum motor plate
- Differentials
- Heavy-duty sealed 4-gear design
- Redesigned bulkheads with underside access
- Maxx-Spec™ ring and pinion gears
- Large 8mm output shafts
- Steel drive cups
- Suspension
- Oil-filled GTR shocks with height-adjustable threaded aluminum bodies
- Inboard rocker arm suspension design for extreme articulation
- Low-CG design improves handling and protects components
- Upgraded heavy-duty axle carriers with oversized bearings
- Heavy-duty rocker arms and rod ends
- Chassis
- Reinforced composite tub for greater durability
- Vented internal battery compartments with quick-release doors
- Low-CG design for improved handling
- Tough skid plates for driveline protection
- ProGraphix® Body
- Clipless body mounting system
- Tough internal frame
- Adjustable rear wing
- External reinforcement for rollover protection
- Wheels and Tires
- Aggressive Talon™ EXT all-terrain tires
- New tire construction resists ballooning
- Tough 3.8” black wheels
- Splined 17mm blue aluminum axle hubs
- Steering
- High-throw bellcrank steering design
- Dual waterproof 2075 servos for 250 oz.-in. of torque
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
MODEL 86086-4: E-Revo: 1/10-Scale 4WD Brushless Electric Racing Monster Truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4GHz radio system with Traxxas Stability Management®, VXL-6s Brushless Power System, and ProGraphix® painted body. Requires: Battery and Charger.
What’s In The Box:
- E-Revo with VXL-6s ESC and 2200kV motor
- Quick Start Guide
- TQi™ 2.4GHz radio system
- High quality maintenance tools
What You’ll Need:
- Batteries
E-Revo requires dual 2s LiPo batteries or dual 3s LiPo batteries. See full list of batteries
- Charger
Traxxas EZ-Peak Live charger (2971) is recommended for easy and fast charging performance
- AA Alkaline Batteries
Four AA alkaline batteries for the transmitter